Grasslin Talento Taxxi Bedienungsanleitung Seite 14

7
5. Error message
When working with the hand programming unit, it can happen that en error
message appears in the display.
• Er 3 = Time switch not recognised (name of the application is not correct)
• Er 2 = Data not correctly transferred. Repeat the transfer.
• Er 1 = Batteries not supplying sufficient voltage
6. Changing the batteries
• Undo the screws
• Replace the batteries
• 2 x type LR 6 alkaline (1.5 volt)
• Close the hand programming unit
again
GB