Cleaning And Maintenance - EuroLite LED TMH-19 Moving-Head Beam Bedienungsanleitung

Display shutoff time
With this function you can shut off the display after 2 to 59 minutes or you can select 'OFF' for deactivate the
display shutoff function.
Reload Default
With this function you can restore the factory settings of the device. The different settings (marked in the
table) will be set back to the default values (shaded).
Reset
With this function you can reset the device via the Control Board.
Adjust
Test function of each channel
With this function you can test each channel on its (correct) function.
Manual control
With this function you can temporarily adjust each channel manually.
Calibration (Calit CH)
With this function, you can calibrate PAN and TILT to their correct positions. The password for this function is
„050".

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The interior of the device should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
30/31 00091769, Version 1.0