Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuseholder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply
cable available at your dealer.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
DMX control channels:
DMX512 connection:
Sound-control:
Flash-rate:
LED type:
Number of LEDs:
Maximum PAN-movement:
Maximum TILT-movement:
Beam angle:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Min. distance from flammable surfaces:
Min. distance to lighted object:
Fuse:
Accessory:
TPC-10 Coupler, silver
DMX cable XLR 3pin 3m bk
Please note: Every information is subject to change without prior notice. 19.06.2015 ©
100-240 V AC, 50/60 Hz ~
60 W
14
3-pin XLR
via built-in microphone
18 Hz
Cree 3 W
19
540°
200°
5°
180 x 205 x 275 mm
3.5 kg
:
45° C
a
(steady state):
60° C
C
0.5 m
0.1 m
T 1.5 A, 250 V
No. 59006856
No. 30227810
31/31
00091769, Version 1.0
Werbung
Inhaltsverzeichnis
