12. Install the top cover (1) and screw it on the back of the appliance (2) tightly
again (s. fig. below).
1
T
OP COVER OF THE APPLIANCE
2
S
CREWS
NOTICE! Adjust the door properly. The seal must close properly.
C
HANGE OF THE HINGE POSITION
1. Keep the door of the freezer compartment (1) closed.
2. Unscrew the holding bracket (2) and remove it (s. fig. below).
1
D
OOR OF THE FREEZER COMPARTMENT
2
H
OLDING BRACKET
3
B
OTTOM BEARING OF THE DOOR
(
DOOR OF THE FREEZER COMPARTMENT
68
):