1. Clean the shelves and the inside with warm water and a mild detergent.
2. Use clear water to rinse.
3. Dry the cleaned surfaces with a cloth.
4. Check the water drain and clean it if needed.
Clean with warm water and a mild, non- acidic detergent. Do not restart the
appliance until the door seals have dried completely.
Clean the drain hole at the back of the cooling
compartment periodically; otherwise defrost water can get
into the cooling compartment. Use a suitable device such
as a pipe cleaner.
5.1 Defrosting
WARNING! Switch off the appliance by turning the thermostat
(depending on model) to position 0 / AUS / OFF and disconnect it from
the mains.
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. Never use a steam cleaner.
RISK OF ELECTRICAL SHOCK!
1. The cooling compartment is equipped with an automatic defrost-system.
2. The water is drained at the back inside the appliance
3. The water is collected in a container underneath the compressor. The water
evaporates in this container
4. The drain must not be blocked.
5. Clean the drain carefully with a pipe cleaner.
depending on model
13
I
NTERNAL CLEANING
D
OOR SEALS
D
RAIN HOLE
C
OOLING COMPARTMENT
85
:
:
:
:
13
.