Pkm KS 165.4 Bedienungsanleitung Seite 66

4. Open the door slightly. Lift the door and remove it carefully.
5. Unscrew the adjustable feet on both sides of the appliance.
6. Unscrew the right bottom hinge bracket (7) and remove it (s. fig. below).
7
B
OTTOM HINGE BRACKET
7. The tilt protection must not be installed on the same side as the hinges.
 If you have installed the tilt protection, it may be necessary to reinstall it to
the opposite side of the hinges (s. chapter 3.4 I
PROTECTION
8. Before you screw the bottom hinge bracket (7) on the left side of the appliance
again, you must move the hinge axis (8) from position A to position B (s.
fig. below).
7
B
OTTOM HINGE BRACKET
8
H
INGE AXIS OF THE BOTTOM HINGE BRACKET
).
NSTALLATION OF THE TILT
66