C
HANGE OF THE HINGE POSITION
1. Unscrew both screws (2) on the back of the top cover (1) and remove them (s.
fig below).
Remove the top cover (1) and keep it in a safe place so that it cannot be
damaged.
1
T
OP COVER OF THE APPLIANCE
2
S
CREWS ON THE BACK OF THE TOP COVER
2. Slightly tilt the appliance back and secure it in this position. Do not tilt the
appliance more than 45
3. Unscrew the four screws (3) on the top of the appliance (6) and remove the
right upper hinge (4) and the bracket of the hinge axis (5) (s. fig. below).
3
S
CREWS
4
U
PPER HINGE
5
B
RACKET OF THE HINGE AXIS
6
T
OP OF THE APPLIANCE
0
!
65
(
DOOR OF THE FRIDGE
):