Using The Compressor - Pari 047 Gebrauchsanweisung

1.4 Using the compressor

The compressor is an electrical device that is operated at ex-
tra-low voltage. It has been designed so that no live parts are
accessible. However, if ambient conditions are unfavourable or
if the compressor or power adapter is damaged, this protection
may no longer be assured. Therefore, please follow the instruc-
tions below to avoid damage to the device and the associated
danger of contact with live parts (e.g., electric shock):
– The compressor, the power adapter and the rechargeable
battery are not splashproof. Protect all device components
and the power adapter from liquid and moisture. Never take
hold of the device, the rechargeable battery, the cable or the
power adapter with damp hands. In addition, the device
must not be operated in a damp environment.
– Only use the PARI power adapter to operate the com-
pressor.
– Make sure that the local supply voltage complies with the
voltage data marked on the compressor identification label.
– Never leave the compressor unattended while it is in use.
– For safety reasons, always disconnect the power adapter
from the socket under the following circumstances:
– if a malfunction occurs during operation
– before cleaning and maintaining the device
– immediately after use
– Never pull the power adapter out of the socket by the cable.
– Make sure that the power adapter cable is never kinked,
pinched or jammed. Do not pull the cable over sharp edges.
– Keep the compressor, the rechargeable battery, the power
adapter cable and the power adapter itself away from hot
surfaces (e.g., stove top, electric fire, open fire). Otherwise,
the compressor housing, the rechargeable battery, the cable
insulation and/or the power adapter itself may be damaged.
– Keep the power adapter away from domestic animals (e.g.,
rodents). They may damage the cable insulation.
– 32 –