Troubleshooting - VOLTCRAFT VC-10 Bedienungsanleitung

Troubleshooting

In purchasing the DMM, you have acquired a product which has
been designed to the state of the art and is operationally reliable.
Problems and malfunctions may, however, still arise.
For this reason, the following is a description of how you can elimi-
nate possible malfunctions yourself.
Observe the safety instructions in all cases.
Error
The multimeter
does not function.
No measuring value
change.
Repairs other than those described above should only
be performed by an authorised electrician.
If you have queries about handling the measuring devi-
ce, our technical support is available under the following
telephone number:
Voltcraft , Lindenweg 15, D-92242 Hirschau,
®
Phone +49 180 / 586 582 7.
50
Possible cause
Are the batteries flat?
Check the battery status.
Is the HOLD function active?