Diode Test - VOLTCRAFT VC-10 Bedienungsanleitung

e) Diode test
Make sure that all the circuit parts, switches and
components and other objects of measurement are
disconnected from the voltage at all times.
Select the measuring range
To activate the function of the acou-
stic continuity tester, press the but-
ton „MODE" (3) twice. Pressing this
button again takes you to the next
measuring function.
• The display indicates the diode
symbol.
• Check the measuring lines for
continuity by connecting both
measuring prods to one another.
After that the value must be
approx. 0 mV.
• Now connect the two measuring
prods with the object to be measured (diode).
• The display shows the continuity voltage in V. If „OL" is visible,
the diode is measured in reverse direction or the diode is defect
(interruption).
44