Dmx-Controlled Operation; Dmx-Protocol - EuroLite LED H2O RGB 10W Bedienungsanleitung

DMX-CONTROLLED OPERATION

You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Set the dipswitch 10 to ON.
Addressing
Each device occupies 5 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP-switches
as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED H²O RGB 10W DMX, you may now start operating these via your lighting
controller.

DMX-protocol

Channel: Value:
1 000 – 255
Channel: Value:
2 000 – 255
Channel: Value:
3
000 – 255
Channel: Value:
4
000 – 255
Channel: Value:
5
000 – 000
001 – 005
006 – 010
011 – 255
Function:
Red (0 – 100%)
Function:
Green (0 – 100%)
Function:
Blue (0 – 100%)
Function:
Master Dimmer
Function:
On
Off
On
Strobe (increasing)
17/18 00050516.DOC, Version 1.2