Error Indicators; Problems Solutions; Technical Specification - eta 512-Serie Bedienungsanleitung

EN

8. ERROR INDICATORS

Acoustic signalling
1 sound
2 sounds
3 sounds
4 sounds

9. PROBLEMS SOLUTIONS

Problem
The vacuum cleaner
rotates in one place.
The vacuum cleaner is
still backing up.
The vacuum cleaner
constantly hits obstacles.
The vacuum cleaner
cleans for a very short
time.
The suction power of
the vacuum cleaner
decreases.

10. TECHNICAL SPECIFICATION

Robotic vacuum cleaner
Appliance protection class
operating voltage
Accumulator
Battery savings
Charging time
Weight
Dimensions
Frequency range
Output power (EIRP)
Wireless technology
Declared acoustic level is 72 dB(A) re 1pW.
Cause
Wheels or side
brushes do not rotate
Sensor or front
bumper error
The vacuum cleaner
got stuck
Main brush error
Cause
Left / right wheel is stuck. Check and clean the wheels
One of the sensors in the
front bumper is dirty or
damaged.
The front bumper is
jammed due to dirt.
The storage battery is
not charged enough or is
at the end of its life.
The dustbin is full or the
filters are dirty.
EN - 62
Remedy
Check and clean the wheels and side
brushes
Clean the sensors and check the
functionality of the front bumper
Eliminate the cause of the jam or move
the vacuum cleaner to an empty space
Check and clean the main brush
Remedy
Clean the front bumper sensors.
If the problem persists, contact
an authorized service centre.
Check and clean the front
bumper.
Fully charge the vacuum cleaner.
If the problem persists, replace the
storage battery with a new one.
Check and clean the dustbin
and filters.
III.
14,4 V (DC)
Li-Ion
2400 mAh
6 hours
2.5 kg
Ø 312 mm x 72 mm
2.4 GHz
15.95 dBm
Wifi