eta 512-Serie Bedienungsanleitung Seite 55

Scheduled cleaning setting
When setting the scheduled cleaning, make sure that the vacuum cleaner is in standby
1. Aim the remote control towards the vacuum cleaner and press the F4 button. The value
for setting the hour in the first line of the display starts flashing.
2. You can now use the F3 buttons (up and down arrows) to set the scheduled cleaning
hour value. Use the F3 buttons (left and right arrows) to switch between setting the
hours and minutes.
3. Switch the setting for minutes (the minute value will flash) and set the minute value of
the scheduled cleaning (the minute setting is in 15-minute increments).
4. To confirm and save the set scheduled cleaning time, press the button F4. The set value
will be permanently lit on the display.
To cancel the scheduled cleaning, set the "00:00". value on the display.
5.6 USING THE MOPING ATTACHMENT
1. Attach the G3 mop to the lower part of the moping
attachment correctly. Soak and wring the mop before use.
Warning
mode.
Note
EN - 55
EN