Vacuum Package In A Canister; Marinieren - CASO DESIGN VRH 590 advanced Original Bedienungsanleitung

DE
EN
PLEASE NOTE

If too much air has been extracted, you can wait a moment and the device will let air
FR
into the bag again. You can repeat the process.
IT

6.6 Vacuum package in a Canister

ES
1.
Place the device on a dry place.
NL
2. Open the device using the handle.
3.
Wipe the vacuum container and its lid
PORT
to make sure they are clean and dry.
4.
Fill the vacuum goods into the canis-
RUS
ter. Be careful not to fi ll in too much
vacuum goods.
DK
5.
Close the container with its lid.
6.
Close the lid of the appliance and press down the handle.
7.
Attach one end of the vacuum hose to the connection of the device (17) and the
other end to the connection of the container lid or on the container lid with the
adapter.
8.
Press button for canisters.
9.
To ensure there is no air leaking between the cover and the canister, use your hand to
push down the cover at the beginning of the vacuum operation.
10. The vacuum sealing process ends automatically as soon as enough vacuum has been
created.
11. You can cancel the operation by pressing „Vacuum & seal / Cancel".
12. Alternatively you can press button pulse vacuum to adjust the vacuum strength by
yourself and stop at desired point of time.
13. Remove the vacuum hose from the cover of container fi rst then from the connector
at device.
PLEASE NOTE

You can also use vacuum ZIP bags for vacuum sealing. Please note that a suitable
adapter is required for the ZIP bags.

6.7 Marinieren

1.
Follow steps 1-5 as described in 6.4.
2.
Press „Marinate" Button.
3.
Air is removed and automatically reinserted after the vacuuming process. The device
will work for 5 cycles.
4.
The „Marinate" process ends automatically.
5.
You can cancel the operation by pressing „Vacuum & seal / Cancel".
6. After the „Marinate" process, sealing is not automatic. You can start this manually with
the „Seal" button if necessary.
PLEASE NOTE

You can also use vacuum marinating containers for marinating. To do this, follow
steps 1–6 as described in 6.6 and press the „Marinate" key. The valve in the container
lid must be open. Remove the vacuum hose from the cover of container fi rst then
from the connector at device.
32 CASO VRH 590 advanced