Herunterladen Inhalt Inhalt Diese Seite drucken

Exsys EX-61002 Anleitung Seite 21

Serieller geräteserver 4x rs-232/422/485
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

EX-61002
5. Device Server Configuration
The EX-61002 is delivered with the following factory settings:
Login User Name:
Network Operation Mode:
By pressing and holding the "Reset" button for 5 seconds, the device will be reset to the factory
settings.
Configuration:
Install the VCOM software (download, see below) as administrator (right click, "run as
administrator"). Then restart the computer.
As soon as you have connected the server (details can be found on the next pages), you
can access the unit via the button "Open in Browser".
If you know the IP address assigned by the DHCP server, you can also type it directly into
your browser and log into the unit.
For the Virtual COM Utility go to:
www.exsys.ch/en or
Search for:
EX-61002
Alternatively you can scan the QR Code on the right:
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
Password:
IP Address:
Serial Interface:
www.exsys.de/en
admin
admin
DHCP
VCOM
RS232
21
English

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis