English
7. Server Settings
2. Serial Port Settings
Interface
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
Timeout time
Frame length
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
Interface type (RS232/485/422)
Serial port baud rate (the value should be the same as the baud rate of the device
connected)
Data bits (the value should be the same as the baud rate of the device connected),
default is 8
Stop bit (the value should be the same as the baud rate of the device connected),
default is 1
Check bits (none, even, odd), (the value should be the same as the baud rate of
the device connected), default is none
None, CTS/RTS can be selected
Time limit for missing/incorrect transmission (if required, default is 20)
Length of Frame (if required, default is 200)
26
EX-61002