Technical Specifications - Cameo F4 FC Bedienungsanleitung

Pin Assignment
3-pin XLR connector:
1
3
2
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.

TECHNICAL SPECIFICATIONS

Product number:
Product type:
Type:
Colour spectrum:
CRI:
Number of LEDs:
LED type:
LED PWM frequency:
Beam angle:
DMX input:
DMX output:
DMX mode:
DMX functions:
Standalone functions:
System settings:
Control:
Operating controls:
Display elements:
Operating voltage:
Power consumption:
Luminous flux:
Efficiency:
Power supply connection:
Fuse:
5-pin XLR connector:
CLF4FC
LED spotlight
Fresnel spotlight with zoom function
RGBW
Up to 95.5
1 LED array (Rx30, Gx30, Bx24, Wx68)
570 W
600 Hz, 1200 Hz, 2000 Hz, 4000 Hz, 6000 Hz, 25 kHz (adjustable)
14° to 52° (field 24° to 69°)
5-pin male XLR
5-pin female XLR
1 channel, 2 channel DIM, 2 channel CCT, 3 channel RGB, 4 channel RGBW, 4 channel CCT,
6 channel HSI/CCT, 7 channel RGB/CCT, 8 channel RGBW 16Bit, 10 channel HSI/CCT, 16
channel RGBW/CCT 16Bit
Dimmer, dimmer fine, strobe, RGBW, RGBW fine, CCT, HSI, colour macros, dimmer curve,
dimmer response, PWM frequency, red shift, fan setting
Dimmer, strobe, RGBW, auto programme, colour macros, user colour 1–8, master/slave
Display flip, display lighting on/off, DMX fail, dimmer curves, dimmer response, red shift,
PWM frequency, colour calibration, auto lock, fan setting, factory reset, UC/loops reset
DMX512, RDM enabled
3x rotary-push encoder, manual zoom
OLED display
100–240 V AC/50–60 Hz
355 W
10,500 lm
29.6 lm/W
INPUT: TRUE1 compatible
OUTPUT: TRUE1 compatible (max. 8.1 A)
T6, 3A/250 V (5 x 20 mm)
5
4
3
2
1
17