Manual Operation - Orbis ORUS RF Anleitung

MANUAL OPERATION

• During automatic operation, when pressing the " " key, the system will act as a
normal thermostat with operating temperature Tm.
Field (22) will show the current time.
Field (14) will show the current date.
Field (15) will display the writing "SEt".
The symbol (18) will appear.
Field (17) will disappear. On field (16) the
set manual temperature value will flash.
With the " " and " " keys, it is
possible to change the value from 2.0°C
to 35°C.
Pressing the " " key or after 45 seconds
from the last operation, field (16) will
display the value of the environment
temperature).
At any time, it is possible to verify the
set temperature pressing the " " key
or the " " key; pressing one of the 2
keys again will allow modification of the
temperature setting. To move from the
manual program to the automatic one,
simply press the " " key again for at
least 3 seconds.
- 44 -
ORUS RF Programmable Thermostat User Manual