Adding Or Deleting Modules From A Channel Group - Guntermann & Drunck ControlCenter-Compact-16C Installation Und Bedienung

Adding or deleting modules from a channel group

How to add modules to or delete them from a channel group:
1. In the directory tree, click
or Target modules .
2. Right-click a user module or a computer module that is already assigned to the
channel group to which you want to add another module to orfrom which you
want to delete a module.
3. On the context menu, click
The display shows the current configuration. The left column (
the matrix switch modules you can add to the channel group.
NOTE: You can assign up to seven additional video channels and a USB or
RS232 channel to a console's KVM channel.
You can assign up to seven additional video channels to the KVM channel of the
computer, too. In addition, you can create a
RS 232 channel.
4. Add more modules to or delete them from the channel group:
Adding modules:
Deleting modules:
5. Click to save the new channel group.
OK
NOTE: The user and computer modules included in the channel group are
marked with a plus sign in the list of modules.
Click the plus sign to view the list of modules.
KVM matrix systems > [Name] > User modules
.
Channel grouping
pool
 In the left column (
want to add. In the right column (
channel to which you want to add the module to.
 Click (arrow right) to assign the module to the
chosen channel.
 In the right column (
want to delete from the channel group.
 Click (arrow left) to delete the module's assign-
ment.
Expanding switchable signals
Not assigned
of four devices for the USB 2.0/
Unassigned ), click the module you
Assigned
Assigned ), click the module you
G&D ControlCenter-Compact · 21
) lists
) click the