Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Initial configuration of network settings
Operational
mode:
IP address:
Netmask:
Connection type:
7. Press
F2
to save your settings.
Configuring the «global» network settings
In complex networks, the global network settings ensure that the matrix switch is
available from all sub networks.
How to configure the global network settings:
1. Press
Ctrl+Num
2. Press
to call the Configuration menu.
F11
3. Select the
Network
4. Select the
Settings
5. Enter the following data in the
Global prefer-
Select the operating mode by pressing
ences
Static:
DHCP:
Hostname:
Enter the matrix switch hostname.
Domain:
Enter the domain the matrix switch is to belong to.
Gateway:
Enter the gateway IP address.
DNS Server 1:
Enter the DNS server IP address.
DNS Server 2:
Enter the IP address of another DNS server (option).
6. Press
F2
to save your settings.
10 · G&D ControlCenter-Compact
Press
F8
to select the operating mode of the interface
or
Network A
Network B
Off:
switches off network interface.
Static:
uses static settings.
obtains the settings from a DHCP server.
DHCP:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Press
to define if the network port and its communication
F8
partner are to negotiate the connection type automatically
(
Auto
) or select one of the listed types.
(default) to open the on-screen display of the KVM matrix system.
entry and press
Enter
entry and press
Enter
Main Network
uses static settings.
auto obtains the settings described below from a
DHCP server.
:
.
.
paragraph:
F8
:
Werbung
Kapitel
Inhaltsverzeichnis
