Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning the use of the appliance in a safe way and
understand the hazards involved. Cleaning and maintenance performed
by the user must not be carried out by children unless they are 8 years
old and under supervision. Children aged under 8 years of age must be
kept away from the appliance and its power cord. Do not let children play
with the appliance.
• This appliance cannot be used by children or persons with reduced
physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction
concerning the use of the appliance in a safe way and understand the
hazards involved.
Damages from failure to follow the manufacturer's instructions are
not covered by the warranty.
PRODUCT DESCRIPTION
4
3
10
12
46
2
1
6 5 7 8
9
16
12
15
13
14
1 Vac and seal – Press this button in standby mode to start the automatic air suction function and the subsequent
welding of the vacuum bag.
2 Pulse vacuum – Press and hold this button to start the air suction function. Release this button to stop this
function.
3 Sealing time – Setting the appropriate suction time according to the food texture
a. Dry: For dry foods, short welding time
b. Moist: For medium wet foods
c. Extended: For wet foods with more liquid
d. Default: For medium wet foods with shorter welding time
4 Pressure – Setting the appropriate suction pressure
a. Normal button: Standard pressure
b. Gentle button: Subtle suction pressure for fragile foods
5 Canister – For sucking the air out of containers, bottles
6 Manual seal
a. This function welds the beginning and end of the bag without air suction.
b. When pressed during air suction in Vac and Seal program, it immediately stops air suction and starts welding.
7 Marinate – Press if you wish to marinate in the vacuum containers – the appliance will adjust the pressure.
8 Air suction opening for vacuum packing of the containers
9 Progress
a. Shows the vacuum packing progress.
b. Indicate the readiness of the product for further operation.
10 Cancel – Immediately stops the current operation.
11 Vacuum chamber – The open end of the bag is placed into the inner part of the chamber, it sucks the air out of
the bag and collects any liquid leaking from the bag.
12 Upper welding bar
VA0060
VA0060
EN
16
11
47
Werbung
Inhaltsverzeichnis
