Configuration Of The Device Server - Exsys EX-61004 Anleitung

English

5. Configuration of the Device Server

The EX-61004 is delivered with the following factory settings:
Login User Name:
Network Operation Mode:
By pressing and holding the "Reset" button for 5 seconds, the device will be reset to the factory
settings.
Configuration:
•
Install the VCOM software (download, see below) as administrator (right click, "run as
administrator"). Then restart the computer.
•
As soon as you have connected the server (details can be found on the next pages), you can
access the unit via the button "Open in Browser".
•
If you know the IP address assigned by the DHCP server, you can also type it directly into
your browser and log into the unit.
For the Virtual COM Utility go to:
www.exsys.ch/en or
Search for: EX-61004
Alternatively you can scan the QR Code on the right:
© Copyright 2023 by EXSYS Vertriebs GmbH. All rights reserved
Password:
IP Address:
Serial Interface:
www.exsys.de/en
admin
admin
DHCP
VCOM
RS232
20
EX-61004