Returning Devices; Disposal - Hettich MIKRO 220 Bedienungsanleitung

28

Returning Devices

Before returning the device, a transport securing device has to be installed.
If the device or its accessories are returned to Andreas Hettich GmbH & Co. KG, in order to provide protection for
people, the environment and materials, it has to be decontaminated and cleaned before being shipped.
We reserve the right to refuse contaminated devices or accessories.
Costs incurred for cleaning and disinfection are to be charged to the customer.
We ask for your understanding in this matter.
29

Disposal

The device can be disposed of via the manufacturer.
A Return Material Authorisation (RMA) form must always be requested for a return.
If necessary, contact the Technical Service Department of the manufacturer:
Andreas Hettich GmbH & Co. KG
Föhrenstrasse 12
78532 Tuttlingen, Germany
Phone: +49 7461 705 1400
Email: service@hettichlab.com
Disposal costs may be incurred.
WARNING
Risk of pollution and contamination for people and the environment.
When disposing of the centrifuge, people and the environment may be polluted or contaminated by
incorrect or improper disposal.
•
Removal and disposal may be carried out only by a trained and authorized service personnel.
The device is intended for the commercial sector ("Business to Business" - B2B).
According to Directive 2012/19/EU, the devices may no longer be disposed of with household waste.
The appliances are assigned to the following groups according to the Stiftung Elektro-Altgeräte Register (EAR
(German foundation under civil law)):
•
Group 1 (heat exchangers)
•
Group 5 (small appliances)
The crossed-out bin symbol indicates that the device must not be disposed of with household waste.
Regulations governing disposal of such devices may differ in individual countries. If necessary, contact
the supplier.
AB2200DEENFRIT Rev. 12 / 12.2022
EN
55/107