Status Codes - Bosch Rexroth PRC 7 00L Serie Typspezifische Anleitung

54/56 Bosch Rexroth AG
• In each case with the additional information "WELD GUN not opened", if the
gun is not opened
• or "WELD GUN compensation position fault", if the gun compensation is not in
the rest position.
In both cases it should be checked if a mechanical defect is the reason for not
reaching the required position.
The error message can be acknowledged via the GUI or by the robot.
9

Status codes

Output of PRC7000 errorcodes see PRC7000 outputs 144..159 Statuscode Bit
0..15.
Example: errorcode > 65535 is output the value 65535 at the PRC7000
Statuscode outputs Bit 0..15.
(See also PRI7000 Error Configuration and Online Help Messages)
R911407348 | PRC 7x00-Lx/Wx-1300