Other Inputs/Outputs - Bosch Rexroth PRC 7 00L Serie Typspezifische Anleitung

R911407348 | PRC 7x00-Lx/Wx-1300
Plug
XGD3 DI_04
DI_05
XGD4 DI_06
DI_07
Plug
XGD1 DO_00
DO_01
XGD2 DO_02
DO_03
Plug / Pin
XDS1 / 7
XGM1 / 1, 2, 3
XGM1 / 4, 5, 6
XGM1 / 7, 8, 9
Plug / Pin
XDS1 / 13
XDS1 / 14
Tab. 8:
Pin Inputs
Gun opened
Gun Not opened
Compensation Home
Compensation Not
Home
Tab. 9:
Pin Outputs
Close Gun
Open Gun
Compensation Lift
Compensation Back
6.4

Other inputs/outputs:

Tab. 10:
Inputs
Main switch release +24V
Secondary current
Transformer temperature
Secondary voltage
Tab. 11:
Outputs
Shunt release
Undervoltage release
Bosch Rexroth AG | Electric Drives and Controls
MGDM inputs
Description
When using a pneumatic gun, this input is used to detect
whether the gun is fully open. This check takes place at the
start of welding before the gun is closed and after the gun
is opened before the WC is set.
This input is not yet used in the current version. The check
is performed in the process via the force signal
When using a pneumatic gun, this input is used to detect
whether the gun compensation is in its rest position. This
check takes place at the start of welding before the gun is
closed and after the gun is opened before the WC is set.
This input is not yet used in the current version
MGDM outputs
Description
When using a pneumatic gun, the signal for closing the gun
is output here.
When using a pneumatic gun, the signal for opening the
gun is output here.
This output is not yet used in the current version.
This output is not yet used in the current version.
Other inputs
Tab.9: Other outputs
45/56