Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Signal input
VIDEO 1 IN
Composite video/ reference input
BNC connector x 2 (loop-through),
75 ohms (automatic termination)
NTSCss/PAL+4:, | Vp-p typical
Black burst signal tor the gen-lock
function*
>
S video (Y/C)
4-pin mini DIN connector x 2 (loop-
through), 75 ohms (automatic
termination)
Y: 1 Vp-p typical, syne negative
C: 0.286 Vp-p (NTSC) /0.3 Vp-p
(PAL) typical
RGB/component/composite video
'
D-sub 15-pin, 3-row x 2 (loop-
through), 75 ohms/high
impedance
R/G/B: 0.714 Vp-p
H/V or composite sync: 1 to 5 Vp-p
Y/B-Y/R-Y: 0.7 Vp-p (NTSC/PAL,
syne on Y)
Composite video: 1 Vp-p
(NTSCa58/PAL3.43)
RGB/component
D-sub 15-pin, 3-row connector x 2
(loop-through), 75 ohms/high
impedance
R/G/B: 0.714 Vp-p (syne on G
acceptable)
H/V or composite syne: 1 to 5 Vp-p
Y/B-Y/R-Y: 0.7 Vp-p typical
(NTSC/PAL, sync on Y)
AUDIO IN 1, 2,3 (L/R) RCA pin jack, more than 10 kilohms
0 dBs (1 Vrms) max.
VIDEO 2 IN
VIDEO 3 IN
Signal output
VIDEO OUT
Composite video
BNC connector, 75 ohms typical
NTSC33«/PAL4.43, 1 Vp-p typical
-
S video (Y/C)
4-pin mini DIN connector, 75 ohms
typical
Y: 1 Vp-p typical, sync negative
C: 0.286 Vp-p (NTSC)/0.3 Vp-p
(PAL) typical
RGB/component
D-sub 15-pin, 3-row connector, 75
ohms typical
R/G/B: 0.714 Vp-p with external
syne
H/V or composite sync: TTL sync
negative
Y/B-Y/R-Y:
0.7 Vp-p typical (syne
on Y)
RCA pin jack
Audio gain: + 1.0 dB typical
Total harmonic distortion:
less than
1%,1 Vrms
AUDIO OUT (L./R)
Video processing
Horizontal rate: 15.6 to 70 KHz,
Vertical rate: 50 to 120 Hz
Input: 10 formats
Output:
7 formats
Gen-lock output: NTSC or PAL
(See page 49.)
1,152 x 1,152 x 24 bits (RGB total)
14.3 to 40 MHz offset phase max.
(equivalent to 80 MHz sampling)
14.3 to 50 MHz max.
Capture range
Preset signal
Video memory
Sampling rate
Output pixel clock
General
100 to 120 V AC, 50/60 Hz,04A
200 to 240 V AC, 50 - 60 Hz, 0.25 A
30 W (max. in operation)
3 W (power off)
Operation temperature 0 to 35°C (32 - 95°F)
Dimensions
424 x 44 x 354 mm (w/h/d)
(16 */4x 14/4 x 14 inches)
excluding bracket and legs
Mass
Approx. 4.1 kg (9 Ib 1 oz)
Supplied accessories
| AC power cord (1)
Signal cable (1)
Screws for mounting bracket kit MB-
510 (4)
Power requirements
Power consumption
Optional accessories
Rack mount bracket MB-510
SMF-400: D-sub 15-pin (male) to 5 BNC cable
SMF-401: D-sub 15-pin (male) to D-sub 15-pin (male) cable
Remote commander RM-854, RM-1271, RM-PJ1292, RM-PJ350
* Note on the gen-lock function
The reference signal should comply with SMPTE 170M (NTSC)
or ITU-R624 (PAL).
Werbung
