Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Hookup for getting the down-converted signal ~
Computer
monitor
To watch the original picture output from the
computer or workstation with the monitor, connect
the monitor cable that has been removed from the
computer or workstation to VIDEO 3 IN loop-through
output.
Personal computer,
workstation, etc.
Audio cable
if necessai
VIDEO 3 IN
¢
mM
(loop-through)
4 AUDIO IN
AUDIO 3 L/R
= | VIDEO OUT
(D-sub 15-pin)
AC power cord
exe
to a wall outlet
Betacam SP video cassette
recorder, etc.
Setting the VIDEO OUT selectors
When the computer monitor is connected to the
* Set the RGB/YBR selector to RGB when a video monitor or
VIDEO 3 IN loop-through output
video projector is connected.
Set the VIDEO 3 IN selectors as follows:
Set it to YBR when a Betacam SP video cassette recorder is
¢ 75Q/OPEN selector
+ OPEN
connected.
* RGB/YBR selector
> RGB
* Set the SYNC selector to SEP (HD or VD separate sync) or
¢ SYNC selector
> AUTO or ON G depending on the
COMP (composite sync) depending on the connected
* connecting equipment
equipment.
For Macintosh and Silicon Graphics Inc. computers, set to
ONG.
26
ane
nee
Werbung
