Sony DSC-1024HD Bedienungsanleitung Seite 46

The black level is set to "0 (IRE) at the factory. If the output
picture is too dark, change the setting to "7.5" (IRE).
1 Press the MENU button twice.
The MENU 2 screen appears.
MFNU 2
MENU
>SETUP NTSC
GEN LOCK
SCH ADJ
10801 60 $3.94
i
USE BOENTER EXI.MENU |
2 Press the CENT 0/8 button to move the cursor (>) to
SETUP NTSC, and press the ENTER button.
The SETUP NTSC menu appears.
¢
SETUP NTSC
ENTER we
cor > (_]
Eis ©
3. Press the CENT 0/8 button to select "7.5" or "0," and
press the ENTER button.
0
USE :DGENTER CANCEL. MENU
4 To quit the menu, press the MENU button twice.
Selecting the
on-screen language
You can select the on-screen language among five languages.
1 Press the MENU button once.
The MENU 1 screen appears.
2. Press the CENT 0/9 button to move the cursor (>) to
LANGUAGE and press the ENTER button.
The LANGUAGE menu appears.
LANGUAGE
ENGLISH
DEUTSCH
FRANCAIS.
ITALIANO
ESPANOL
USE-QGFNTER CANCEL MENU
3 Press the CENT ¢/6 button repeatedly to move the
cursor (>) to the desired language, and press the ENTER
button.
4 To quit the menu, press the MENU button three times.
Adjusting the SC/H
(Subcarrier to Horizontal)
When vou edit or record a composite output signal with a
VCR, you need to adjust the subcarrier-to-horizontal phase
(SC/H).
Prepare special measurement equipment for the adjustment.
1. Press the MENU button twice
The MENU 2 screen appears.
2. Press the CENT 0/9 button to move the cursor (P) to
SC/H ADJ and press the ENTER button.
The adjustment value is displaved on the screen
CH = 0
3 Press the CENT ¢/* button to adjust the SC/H.
4 To quit the menu, press the MENU button twice.
Using the HDTV
fo Fi coltig
When 1080i (HDTV) signal is output, adjust the vertical
frequency to 60 Hz or 59.94 Hz according to the system of the
monitor or video equipment connected to DSC-1024HD.
1 Press the MENU button twice.
The MENU 2 screen appears.
2 Press the CENT ¢/® button to move the cursor (P) to
10801 60/59.94, and press the ENTER button.
The 1080I setting screen appears.
3080!
»60
§9.94
USE.QQENTER CANCEL:MENJ '
3 Press the CENT ¢/% button to select the vertical
frequency of the connected system: 60 (Hz) or 59.94
(Hz), and press the ENTER button.
4 To quit the menu, press the MENU button twice.
When the output format is anything other than 1080i, you
cannot switch to the 1080I setting screen. "NOT APPLICABLI."
appears on the screen instead.