Werbung
Verfügbare Sprachen
Verfügbare Sprachen
. Rear panel
VIDEO 1 IN connector section
[3] VIDEO 3 IN connector section
Two sets of video inputs and loop-through outputs.
A set of RGB or component (Y/B-Y/R-Y) signal inputs and
:
loop-through outputs.
Y/C IN (4-pin):
if both connectors are used.
component (Y/B-Y/R-Y) outputs of video equipment. The
equipment.
When nothing is connected to the loop-through output
Also, input the reference signal for the gen-lock (black
connector, set to 75Q. When the loop-through output
burst signal) to the VIDEO 1 IN REF connector.
connector is used, set to OPEN.
Y/C OUT (4-pin):
ee,
RGB/YBR* selector:
Loop-through output of the Y/C IN connector.
Set to RGB or YBR according to the format of the signal
Loop-through output of the COMP IN connector.
SYNC selector:
Normally set to AUTO. Set to ON G to use the sync signal
A set of composite video or RGB/component (Y/B-Y/R-Y)
on green signal are input.
signal inputs and loop-through outputs.
'
* YBR is an abbreviation of Y/B-Y/R-Y component signal.
Composite video/RGB/component input (D-sub 15-
pin, 3-row):
Connect one of the D-sub connectors to the composite
video, RGB or component (Y/B-Y/R-Y) outputs of video
equipment. The other D-sub connector is a loop-through
output.
Termination switch:
When nothing is connected to the loop-through output
connector, set to 75Q. When the loop-through output
connector is used, set to OPEN.
NORMAL/COMP (composite) input selector:
Usually set to NORMAL when RGB or component signal is
input to the D-sub connector. Set to COMP when
composite video signal is input.
RGB/YBR* (RGB/component) input selector:
Set to RGB or YBR according to the format of the signal
input to the D-sub connector.
to he}
Werbung
