Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before you get started
First make sure that the power to each piece of equipment is
* To disconnect the cable, pull out by grasping the plug.
turned off.
Never pull the cable itself.
¢ Use connecting cables suitable for the equipment to be
* Read the instruction manual of the equipment to be
connected.
connected.
* The cable connectors should be fully inserted into the jacks.
A loose connection may cause hum and other noise.
Hookup for:getting the up-converted signal .. ....-...
VCR, laser disc player,
Betacam SP video cassette
game machine, etc.
recorder
S|
| Ta
TE}
AUDIO OUT L/R
o 90000
CTRL S IN
Public announcement
Cee
ane Seam
SRS Se Se ee SSS
a Scns
Saar
ose
S Te
ess Ss SST |
system, etc
Setting the VIDEO OUT selectors
When the Betacam SP video cassette recorder is
* Set the RGB/YBR selector to RGB (when a computer
connected to VIDEO 3 IN
monitor, data projector or LCD projector is connected).
Set the VIDEO 3 IN selectors as follows:
© Set the SYNC selector to SEP (HD or VD separate sync) or
¢ 75Q/OPEN selector > 75 Q
COMP (composite sync) depending on the connected
e RGB/YBR selector
+ YBR
equipment.
* SYNC selector > AUTO
Connect only the three plugs of the signal cable to the Betacam
SP video cassette recorder: green plug to Y connector, red to R-
Y, and blue to B-Y. Leave the other plugs, if provided,
disconnected.
Werbung
