Sony DSC-1024HD Bedienungsanleitung Seite 31

8] Remote sensor
Receives the beam from the remote commander.
9] CHROMA +/- button
Press to adjust the picture chroma level.
(0) PHASE +/- button
Press to adjust the picture phase level.
1] CONTRAST +/- button
Press to adjust the picture contrast.
2] OVERFLOW indicator
[3] APERTURE button and indicator
Press this button to turn on the indicator to make the
picture sharper. Press it again to turn off the indicator for a
softer picture. _
STILL button and indicator
=
Press this button to turn on the indicator to get a still
picture. Press it again to turn off the indicator to resume
the normal screen.
{| OPEN button
Press to open the front cover.
=
6| INPUT SELECT buttons
*
Press to select the input signal.
1: to select the input source connected to the VIDEO 1 IN
(Y/C or COMP) connector and the AUDIO 1 IN
connector.
2: to select the input source connected to the VIDEO 2 IN
(RGB, YBR* or COMP) connector and the AUDIO 2 IN
connector.
3: to select the input source connected to the VIDEO 3 IN
(RGB or YBR*) connector and the AUDIO 3 IN
connector.
YBR is an abbreviation of Y/B-Y/R-Y component signal.
[17]
(ia
ad
ZOOM +/- buttons
Press the + button to zoom up, and the — button to zoom
down.
SIZE V/H +/- buttons
Press to adjust the size of the picture.
V +: to expand the vertical size
V-. to reduce the vertical size
H+: to expand the horizontal size
H-: to reduce the horizontal size
CENT0/d/</> buttons/cursor buttons
Press to shift the picture in the direction of the arrow.
The ¢ and 4% buttons are also used for moving the cursor on
the menu screen.
MENU button
Press to make the menu appear, or quit the menu.
21) ENTER button
Press to select the desired item in a menu.
31
usi6ua