Dreame Bot D9 Max Benutzerhandbuch Seite 11

EN
Routine Maintenance
Note: Wet cloths can damage sensitive elements within the robot and charging dock. Please use dry rags for cleaning.
Clean the Laser Distance Sensor/
Returning-to-dock Sensor
Robot Restarting
If the robot stops responding or cannot be turned off, press and
hold down the button for 10 seconds to forcefully turn it off.
Then press and hold the button for 3 seconds to turn the robot
on.
Battery
The robot contains a high-performance lithium-ion battery
pack. Please ensure that it remains well-charged for daily use to
maintain optimal battery performance. If the robot is not used for
an extended period of time, turn it off and put it away. To prevent
damage from over-discharging, the robot should be recharged at
least once every three months.
16
Clean the Cliff Sensor
Clean the Charging Contact
FAQ
Problem Type Solution
Battery level is low. Recharge the robot at the charging dock, then try again.
Robot does not turn on The ambient temperature is too low (below 0 ° C) or too high (above 40 ° C). The operating
temperature of the robot is 0° C to 40° C.
The charging dock is not receiving power. Please confirm that both ends of the power cord
Robot does not recharge are plugged in correctly.
Poor contact. Clean the charging contacts of the charging dock and the robot.
There are too many obstructions around the charging dock. Place the charging dock in a
Robot does not return to
more open area.
charging dock
Please clean the dock's signaling area.
Robot is malfunctioning Turn off the robot and then reactivate it.
Robot is making a strange A foreign object may be caught in the main brush, side brush, or one of the main wheels.
noise Stop the robot and remove any debris.
Robot no longer cleans The dust bin is full. Please clean it.
efficiently or leaves dust The filter is blocked. Please clean it.
behind A foreign object is caught in the main brush. Please clean it.
There is something wrong with the Wi-Fi connection. Reset the Wi-Fi and download the
latest version of the Mi Home/Xiaomi Home app, then try reconnecting.
Location permission is not open. Please ensure the location permission on the Mi Home/
Robot cannot connect to Xiaomi Home app is enabled.
Wi-Fi Wi-Fi signal is weak. Make sure the robot is in an area with good Wi-Fi coverage.
5GHz Wi-Fi is not supported. Please ensure your robot connects to 2.4GHz Wi-Fi.
The username or password of Wi-Fi is incorrect. Please enter the correct username and
password.
EN
17