Residual Risks; Technical Data - Scheppach BCHS300-ProS Original Bedienungsanleitung

• The device must not be used if it is damaged or
the safety devices are defective. Replace worn and
damaged parts.
• Do not use the device in the vicinity of flammable
fluids or gases. There is a risk of fire or explosion
in the event of a short circuit.
• Ensure that all handles and safety equipment are
installed when using the power tool. Never attempt
to use an incomplete electric tool or one with an
impermissible modification.
• Always familiarise yourself with your environment
and pay attention to possible hazards that you may
not hear due to the noise from the power tool.
• Avoid using the power tool if people, and especially
children, are in the vicinity.
m Warning! This power tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain cir-
cumstances.
In order to prevent the risk of serious or deadly in-
juries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
machine.
Battery
Vapours may escape if the battery is damaged or used
improperly. Supply fresh air and consult a doctor in
the event of discomfort. The vapours can irritate the
respiratory tract.
m Risk of fire! Risk of explosion!
Never use a damaged, defective or deformed batter-
ies. Never open or damage the battery and do not
drop it.
Never charge batteries in environments with acids and
highly flammable materials.
Protect batteries from heat and fire.
Only use the battery in ambient temperatures between
10°C and +40°C.
Never place on radiators or expose to strong sunlight
for extended periods of time.
Let the device cool down first after heavy use.
Short circuit - Do not bridge battery contacts with me-
tallic parts.
When disposing, transporting or storing, the battery
must be packed (plastic bag, box) or the contacts must
be masked.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the "Safety In-
structions" and the "Intended Use" together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the op-
erating button may not be pressed when inserting
the plug in an outlet. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.
• Keep your hands away from the working area when
the machine is in operation. Cuts!
• Hearing damage! Staying in the immediate vicinity
of the running device for a longer period of time may
cause hearing damage. Wear hearing protection!
• Damage to health resulting from hand/arm vibration
if the device is used over extended period of time or
if it is not properly operated and maintained.
Despite observing the operating manual, there may
also be residual risks that are not obvious.
7.

Technical data

Rated voltage
Battery type
Cutting length
Guide rail type
Guide rail length
Saw chain type
Chain pitch
Chain thickness
Maximum chain speed
Sprocket teeth
www.scheppach.com
20VDC
Li-Ion 20V / 4 Ah
26cm
Royal AP12-45-
437P-90
12"
Royal 3/8.043.45E(90)
9.525 mm (3/8")
1.27 mm
10 m/s
6 x 9.525 mm
GB | 35