Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.
Do not leave the machine when it is plugged in.
Unplug the unit from the outlet when not in use and
before servicing.
4.
Do not allow machine to be used as a toy. Close
attention is necessary when operating near children.
5.
Use the machine only as described in this manual.
Use only the manufacturer's recommended
attachments.
6.
Do not use with damaged cord or plug. If the
appliance is not working as it should be, has been
dropped, damaged, left outdoors or dropped into
water, return it to a service centre.
7.
Do not pull or carry by cord, use cord as a handle,
close a door on the cord, or pull the cord around
sharp edges or corners. Do not run the appliance
over the cord. Keep the cord away from heated
surfaces.
8.
Do not unplug by pulling on the cord. To unplug, grasp
the plug, not the cord.
9.
Do not handle the plug, cord or appliance with wet
hands.
10. Do not insert any object into openings. Do not use
with any opening blocked; keep free of dust, lint, hair,
and anything that may reduce air flow.
11. Keep clothing, hairs, fingers, and all parts of body
away from openings and moving parts.
12. Do not pick up anything that is burning or producing
smoke, such as cigarettes, matches, or hot ashes, or
any health endangering dusts.
13. Turn off all controls before unplugging.
14. Do not use to pick up flammable or combustible
liquids such as petrol, or in areas where they may be
present.
15. The voltage and frequency indicated on the name
plate must correspond to mains voltage.
16. The connections of mains cables to extension cables
must be splash proof. Always fit the mains plug to a
correct socket connection.
17. Only those people who have been trained and know
about the risks may:
– operate the machine;
– service it;
– repair it.
18. For repairs, use original Nilfisk spare parts only. The
use of other similar parts will automatically exclude
the manufacturer liability.
19. When cleaning and servicing the machine, local or
national regulations must be applied for the safe
disposal of liquids which may contain chemicals,
grease, oil, acid, alkalines or other dangerous liquids.
20. When disposing of old machines or machine
components local or national regulations must be
applied for their safe disposal.
08603372(3)2004-05 A
USE AND MAINTENANCE MANUAL
KNOW YOUR MACHINE
1.
Display.
2.
Handle bar.
3.
Handle bar adjustment.
4.
Rear grip position for transport.
5.
Solution filter.
6.
Tank top.
7.
Solution tank.
8.
Recovery tank.
9.
Front grip position for transport.
10. Squeegee head.
11. Spray nozzle.
12. Front squeegee.
13. Brush.
14. Rear squeegee.
15. Pre-filter vacuum motor.
16. Exhaust sound insulation.
17. Pre-filter turbine.
BRUSH INSTALLATION
WARNING!
Moving parts - unplug machine before
servicing.
CAUTION!
The brush locking screw has a left hand
thread.
1. Place brush opening on drive shaft and let
engage.
2. Screw in safety screw with washer and
tighten brush.
BRUSH PRESSURE ADJUSTMENT
+ more brush pressure = turn setscrew to the right.
- less brush pressure = turn setscrew to the left.
FILLING THE SOLUTION TANK
1.
Fill the solution tank with cleaning solution.
2.
Do not fill up the solution tank completely: leave 3 cm
from the top of the tank.
3.
The solution should be a mixture of water and a
cleaning chemical according to the type of job.
4.
Always follow the dilution instructions on the chemical
container label.
5.
The temperature of the cleaning solution must not
exceed 40°C.
CAUTION!
Use only low-foaming, non-flammable liquid
detergents intended for machine
application.
3
Werbung
Inhaltsverzeichnis
Fehlerbehebung
