Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
S
y
m
b
o
l
s
o
S
y
m
b
o
l
s
o
Threatened hazard or hazardous situation. Not ob-
serving this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not ob-
serving this instruction can lead to faults.
User information. This information helps you to use all
the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
N
o
r
m
a
l
N
o
r
m
a
l
This agitator is suited for DIY work for mixing liquid and
powdry building material such as: paints, mortar, adhe-
sives, plaster, grouting compounds, knifing fillers, coat-
ing compounds.
Only beaters intended for the device with the max. diameter
120 mm (RW 1400) – 140 mm (RW 1600 A) must be used.
This machine must not be used
•
− as a drilling machine or as a drive for other devices
− for polishing, grinding, sharpening, engraving with any
attachments.
Any other utilisation counts as improper use, especial-
ly mixing combustible or explosive materials (
explosion hazard) and use with foodstuffs. The manufactur-
er is not liable for damages resulting from improper use.
the user alone shall bear the risk.
The intended usage also includes compliance with the op-
erating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
The relevant accident prevention regulations for the opera-
tion as well as the other generally acknowledged occupa-
tional medicine and safety rules must be complied with.
Unauth orised modifi ca tio ns on th e agitator exclude a
liability of the manufacturer for damages of any kind result-
ing from it.
Only persons who are familiarised with the device and in-
formed about possible risks are allowed to prepare, operate
and service this device. Repair works may only be carried
out by us or by a customer service agent nominated by us.
R
i
s
i
R
i
s
Even if used properly, residual risks can exist even if
the relevant safety regulations are complied with due to the
design determined by the intended purpose.
Residual risks can be minimised if the "Safety instructions" and
the "Normal intended use" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will re-
duce the risk of personal injury or damage to the equipment.
11
p
e
r
a
t
i
n
g
m
a
n
u
a
l
p
e
r
a
t
i
n
g
m
a
n
u
a
l
i
n
t
e
n
d
e
d
u
s
e
i
n
t
e
n
d
e
d
u
s
e
d
u
a
l
r
i
s
k
s
i
d
u
a
l
r
i
s
k
s
Failure to observe the safety precautions can lead to injury
to the operator or damage to property.
Risk from electricity, by using non-standard electrical con-
nections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Hand arm vibration a
Measuring uncertainty: K = 1,5 m/s²
Warning!
The actual vibration emission level during the use of the
machine may differ from that indicated in the operating
instructions or indicated by the manufacturer. This may be
caused by the following factors to be minded before and during
the use:
- Proper use of the machine
- Correct operating of the machine
- Proper condition of the machine for use
-
Proper condition of the beaters or installation of the correct
beater
fire and
- Handles and optional anti-vibration handles properly
mounted on the machine body
When you feel uncomfortable or notice discoloration of skin on
your hands during the use of the machine, stop working
immediately. Observe sufficient break times to rest. Failure to
have sufficient break times may result in a hand-arm vibration
syndrome.
The extent of exposure depending on the type of work or
machine use should be estimated and appropriate breaks
taken. In this way, the extent of exposure can be considerably
reduced over the entire work time. Minimise the risk caused by
vibrations. Maintain this machine according to the instructions
in the manual.
Avoid the use of this machine at temperatures under 10°C.
Create a work schedule in order to minimise vibration exposure.
Pass the safety instructions on to all persons who
work with the machine.
Children and young persons under 16 years of age
as well as persons who have not read the instruc-
tion manual are not allowed to operate this product.
Keep these safety instructions in a safe place.
Follow the attached "General safety instructions".
Safety instructions for agitators
a) Hold the power tool with both hands by the handles
provided. Loss of control may result in injury.
V
i
b
r
a
t
i
o
n
s
V
i
b
r
a
t
i
o
n
s
(
h
a
n
d
a
r
m
v
i
b
r
a
t
i
o
n
s
(
h
a
n
d
a
r
m
v
i
b
r
a
t
i
o
n
s
= max 3,2 m/s²;
vnw
S
a
f
e
t
y
i
n
s
t
r
u
c
t
i
o
n
s
S
a
f
e
t
y
i
n
s
t
r
u
c
t
i
o
n
s
)
)
Werbung
Inhaltsverzeichnis
