Grundig GDT 2561 X Bedienungsanleitung Seite 12

INSTALLATION OF APPLIANCE _______________________
A WARNING
Please read saffety instructions
before setting up.
WARNING
A
Failure to install the screws or fixing
device in accordance with these
instructions may result in electrical
hazards.
Drilling the Hanging Holes
Paste the installation template provided with the
product on the surface where the product is to
be installed.
Drill holes with the diameter of 04 mm on the
points marked A, B, C, D on the arrangement
scheme (Fig. 6).
Tighten the exhaust vent of the specified tube in
the installation template to the given dimensions
A
MOUNTING TEMPLATE SCALE 1:1
MONTAGESCHABLONE MAßSTAB 1:1
SAGOMA DI MONTAGGIO RELAZIONE 1:1
ESTAMPA DE MONTAJE ESCALA 1:1
GABARIT POUR MONTAGE ECHELLE 1:1
SZABLON MONTAŻOWY SKALA 1:1
ASENNUSSAPLUUNA M1:1
B
Fig. 6
The dimensions provided in the
C
images are for representation pur-
pose. Carefully Follow the installa-
tion template offered to you with the
purchased product.
The equipment will be installed on the housing in
points A, B, C, D using the 4 x 40 screws supplied
with the equipment. Do not rub the front panel
12 ENGLISH
500
456
248
CUT-OUT LINE ON CUPBOARD FOR AIR EXIT
AUSSCHNITT IM SCHRANK FÜR LUFTAUSTRITT
LINEA DI TAGLIO PER USCITA ARIA
RECORTE DEL ARMARIO PARA LA SALIDA DE AIRE
LIGNE A COUPER POUR LA SORTIE D'AIR
ZAZNACZYĆ W SZAFCE OTWÓR POD WYLOT POWIETRZA
A,B,C,D = Ø4
against the housing case when the sliding set is
moving (Fig. 7).
1
2
3
Fig. 7
If necessary, insert the 0150/120 mm tube adapt-
er at the tube outlet (Fig. 8).
C
D
Fig. 8
C
Perform the connection for the air exhaust for this
product.
The 0150/120mm exhaust tube
adapter is sold optionally. Contact
your dealer in order to purchase it.
1