Grundig GDT 2561 X Bedienungsanleitung Seite 11

CLEANING AND MAINTENANCE _______________________
C
Before cleaning and maintenance,
unplug the product or turn off the
switch.
Cleaning of Aluminum Grease
Filter
Aluminium Grease Filter is used to retain the
oil particles in the air. Aluminium Grease Filter
may change colour as it is washed; this is
normal and does not require replacing your
filter.
1
(Figure 4)
1- External Aluminium Grease Filter
2- Internal Aluminium Grease Filter
Pull the sliding plate out by holding the
■
front panel. Remove the external Aluminium
Grease Filter first, and then the internal Alu-
minium Grease Filter.
Push the Aluminium Grease Filter lock for-
■
ward.
Then lower it slightly down and pull it out
■
(Figure 4). Otherwise, you can bend the
filter. Wash and rinse Aluminium Grease
Filters with liquid detergent and replace Al-
uminium Grease Filters to their sockets by
by carrying out the steps specified above in
reverse order. This filter retain the oil parti-
cles in the air.
C
You may wash your Aluminium
Grease Filters in the dishwasher.
CAUTION
A
In case of normal use, clean your
Aluminium Grease Filter once in a
month.
Replacement of Carbon Filters
Odour removing filters contain charcoal
(Active carbon). Aluminium Grease Filters
must be installed in the product, regardless of
whether or not carbon filters are used.
2
(Figure 5)
Remove Aluminium Grease Filters (Figure
■
4).
To remove the charcoal filter, remove the
■
charcoal filter from its housing by rotating
it counter-clockwise from the tab (Figure 5).
Install the new charcoal filter.
■
Install the Aluminium Grease Filters.
■
A
CAUTION
Carbon filter shall never be washed.
A
CAUTION
Replace carbon filters once every 3
months.
A
CAUTION
You can obtain the carbon filter from
the authorized services.
ENGLISH 11