SUBLIMED actiTENS Gebrauchsanleitung Seite 75

ƒ Step 2: clip the 4 cables on to the low back electrode and on to the actiTENS, making sure that
the ends are compatible (narrow end on the electrode side, wide end on the
Remember
The two ends of a cable are different. Make sure you clip the wide end to the
actiTENS
Remember
There are two possible configurations.
ƒ Step 3: place the strip on the area of stimulation.
Your device is ready for a stimulation session.
When you want to start a session, follow the
instructions for Launching a programme
(section 14).
and the narrow end to an electrode.
side).
actiTENS
75