SUBLIMED actiTENS Gebrauchsanleitung Seite 61

ƒ Step 3: attach the
actiTENS
ƒ Step 4: stick the self-adhesive strip attached to the
near to the electrodes.
actiTENS
If you are using a textile accessory, place the accessory on
the desired area of the body, then position the
directly on the textile accessory.
1
ƒ Step 5: clip the wide end of the cables on to the channels of
the neurostimulator.
actiTENS
ƒ Step 6 : turn on the
green. Your device is ready for your stimulation session. When you want to start a session,
follow the instructions for Launching a programme (section 14).
Remember
The will automatically turn off after 10 minutes if a session is not launched.
actiTENS
to the self-adhesive strip.
2
by pressing the ON/OFF button. The indicator light will flash
actiTENS
actiTENS
Illustrative example with two
1 2
electrodes
1 2
61