Mercedes-Benz DUO plus Betriebsanleitung Seite 59

MBA_BA.book Seite 57 Donnerstag, 18. Juni 2015 7:44 07
Refitting of the belts (left and right)
1. First put the tongues 19 of the two
harness straps together and engage in
the buckle 17 (see Buckling up the
child page 49).
2. Feed the belt loop (black seam) into
the cover and into the outer side
slot 25 of the seat shell.
3. Slide the metal part 30 into the belt
loop (black seam).
4. Hook the belt loop into the long side of
the metal part 30.
5. Push the belt loop back and hook into
the short side of the metal part 30.
6. Pull the belt until the metal part 30 lies
flush against the seat shell.
7. Feed the belt end 16 into the cover.
8. Attach the elasticated edge of the cov-
er (lower half) onto the hooks in the
seat shell.
DUO plus child seat
9. Clip the plastic insert of the cover into
the opening of the seat shell.
At the top
1. Attach the shoulder pads 11 to the
shoulder belts 10. When doing so do
not swap over the shoulder pads.
2. Thread the shoulder belts 10 through
the pair of slots 12.
57