Mercedes-Benz DUO plus Betriebsanleitung Seite 57

MBA_BA.book Seite 55 Donnerstag, 18. Juni 2015 7:44 07
7. Route the shoulder belts 10 through
the pair of slots 12.
8. Push the shoulder belts 10 at the rear
of the seat between the deflection
bar 32 and the carrier 31 of the shoul-
der belt height adjuster 14.
9. Hook the shoulder belts 10 at the rear
of the seat shell into the yoke 13.
10. Feed the belt loops of the shoulder
pads 11 into the pair of slots 12.
11. Press down the button of the shoulder
belt height adjuster 14 at the rear of
the seat and tilt the shoulder belt
height adjuster 14 forward.
12. Now slide up the belt loops of the
shoulder pads 11 onto the carrier 31
of the shoulder belt height
adjuster 14.
13. Fold the fabric cover over the outer
edges of the seat shell.
14. Fasten the elastic seam of the fabric
cover with the hooks on the seat shell.
DUO plus child seat
Removing the belts (left and right)
1. Open the buckle 17 and loosen the
harness straps as much as possible
(see Loosening the harness page 48).
2. Press down the button of the shoulder
belt height adjuster 14 at the rear of
the seat shell and tilt the shoulder belt
height adjuster 14 forward.
3. Now slide down the belt loops of the
shoulder pads 11 from the carrier 31
of the shoulder belt height
adjuster 14.
4. Unhook the shoulder belts 10 at the
rear of the seat shell from the yoke 13.
Ensure that the unhooked yoke 13
does not slip behind the shell into the
base (for instance when pulling the
belt end 16).
55