Mercedes-Benz DUO plus Betriebsanleitung Seite 43

MBA_BA.book Seite 41 Donnerstag, 18. Juni 2015 7:44 07
Any malfunctions are usually caused by dirt
on the insertion guides and on the hooks.
This problem can be solved by cleaning
these points.
3. On both sides of the seat squeeze the
green locking button 5 and the red
release button 6 together and remove
the connector protection 33.
4. Press the green securing knob 5 and
the red release button 6 on both
ISOFIX locking latches 3 towards each
other.
Make sure that both hooks of the
ISOFIX locking latch 4 are open and
operational.
5. Position the two connectors 3 directly
in front of the two insertion guides 1.
Engaging ISOFIX
1. Slide both ISOFIX locking latches 3
into the insertion guides 1, until the
ISOFIX locking latches 3 engage on
both sides. "CLICK!"
Attention! The green securing knob 5
must be visible on both sides.
DUO plus child seat
2. Push the child seat towards the back-
rest applying firm, even pressure on
both sides.
3. Pull both sides to check that the seat
is positioned firmly.
Caution! The green locking button 5
must now be visible on both sides.
41