Hach 8350.3 Benutzerhandbuch Seite 19

Warning
Replace a sensor.
Calibration is in progress... A calibration was started but not
Section 7 Replacement parts and accessories
Personal injury hazard. Use of non-approved parts may cause personal injury, damage to the
instrument or equipment malfunction. The replacement parts in this section are approved by the
manufacturer.
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Consumables
Description
Buffer Solution, pH 4, red
Buffer Solution, pH 7, yellow
Buffer Solution, pH 10, blue
ORP Reference Solution, 200 mV
ORP Reference Solution, 600 mV
Accessories
Description
Ultrapure pH/ORP module
PVC DN 40 flow chamber, flange fitting
PP immersion shaft, adjustable flange (0.5 meter)
PP immersion shaft, adjustable flange (1 meter)
PP immersion shaft, adjustable flange (1.5 meter)
PP immersion shaft, 2 clip fittings for 8350/8351 (0.5 meter)
PP immersion shaft, 2 clip fittings for 8350/8351 (1 meter)
PP immersion shaft, 2 clip fittings for 8350/8351 (1.5 meter)
PP immersion shaft, fixed flange (0.5 meter)
PP immersion shaft, fixed flange (1 meter)
PP immersion shaft, fixed flange (1.5 meter)
PP chemical cleaning kit (nozzle and feed pipes)
Table 4 Warning list (continued)
Description
The Sensor days counter is more than
the interval selected for sensor
replacement. Refer to Configure the
sensor on page 9.
completed.
W A R N I N G
Resolution
Replace the sensor. Reset the Sensor
days counter on the Diagnostics/Test >
Reset menu.
Return to calibration.
Quantity
500 mL
500 mL
500 mL
500 mL 25M2A1001-115
500 mL 25M2A1002-115
LXZ525.99.D0006
08350=A=9500
08350=A=1005
08350=A=1010
08350=A=1015
08350=A=1105
08350=A=1110
08350=A=1115
08350=A=6005
08350=A=6010
08350=A=6015
08350=A=7000
Item no.
2283449
2283549
2283649
Item no.
English 19