Technical Data; Unpacking - Scheppach WIG2000-Multi Original Bedienungsanleitung

• Using an electromagnetic filter that reduces electro-
magnetic interference.
General safety measures
The user is responsible for installing and using the de-
vice properly in accordance with the instructions of the
manufacturer. If electromagnetic interference is iden-
tified, it is the responsibility of the user to eliminate it
using the technical aids mentioned above under point
"Important note on the power connection".
Warning! This power tool generates an electromag-
netic field during operation. This field can impair active
or passive medical implants under certain conditions.
In order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer of
the medical implant prior to operating the power tool.

6. Technical data

Dimensions L x W x H
Mains voltage U
1
Power consumption P1
Protection category
Insulation class
Type of cooling
Weight
MMA welding
Off-load voltage U
0
Working voltage U
2
Welding current l
2
Highest mains current rated
value
max
Effective value of the largest
mains current
eff
Energy efficiency of the power
source
Duty cycle X
15%
60%
100%
30 | GB
360 x 146 x 235 mm
230V~ / 50/60 Hz
9,6 KVA
H
IP 21S
AF
7.8 kg
95,5 V~
20.6 - 28 V~
15 - 200 A
41,2 A
15,9 A
82%
200 A
100 A
80 A
www.scheppach.com
TIG - welding
Off-load voltage U
0
Working voltage U
2
Welding current l
2
Highest mains current rated
value
max
Effective value of the largest
mains current
eff
Energy efficiency of the power
source
Power consumption in idle
state
Duty cycle X
25%
60%
100%
Technical changes reserved!
7.

Unpacking

• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m WARNING!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
14 V~
10.6 - 18 V~
15 - 200 A
28,4 A
14,2 A
80%
14W
2000 A
115 A
90 A