Symbols And Their Meaning; Product Description And Specifications - Bosch GCM 254 D Professional Originalbetriebsanleitung

32 | English
the tool arm back to the neutral position first and then
switch the power tool off.
Do not touch the saw blade after working before it has
u
cooled. The saw blade becomes very hot while working.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
The power tool is delivered with a laser warning sign
u
(see table: "Symbols and their meaning").
If the text of the laser warning label is not in your na-
u
tional language, stick the provided warning label in
your national language over it before operating for the
first time.
Never make warning signs on the machine unrecognis-
u
able.
Do not direct the laser beam at persons or
animals and do not stare into the direct or
reflected laser beam yourself. You could
blind somebody, cause accidents or damage
your eyes.
If laser radiation hits your eye, you must close your
u
eyes and immediately turn your head away from the
beam.
Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not let children use the power tool unsupervised.
u
They could unintentionally blind themselves or other per-
sons
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.

Symbols and their meaning

Laser radiation
Do not look directly into the beam
Class 2 consumer laser product
EN 50689:2021
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
1 609 92A 88N | (29.03.2023)
Symbols and their meaning
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
To set any bevel angle, the tool arm must
be able to move freely.
Lock button pulled up:
The bevel angle can be set.
Lock button pushed down:
The set bevel angle is locked.
Take note of the dimensions of the saw
blade. The hole diameter must match the
254 mm 30 mm
tool spindle without play. If it is neces-
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
the reducers provided with the saw
blade.
The saw blade diameter must match the
information specified on the symbol.
The left/right adjustable fence must be
removed when sawing bevel angles.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Bosch Power Tools