Symbols And Their Meanings; Product Description And Specifications; Intended Use; Product Features - Bosch GCM 10 MX Professional Originalbetriebsanleitung

Symbols and their meanings

Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers or
arms away from this area.
30mm
Take note of the dimensions of the saw
blade. The hole diameter must fit the tool
spindle without play. If it is necessary to
use reducers, ensure that the dimensions
of the reducer are suitable for the base
blade thickness and the saw blade hole
diameter, as well as the tool spindle dia-
meter. Wherever possible, use the redu-
cers provided with the saw blade.
The saw blade diameter must match the
information specified on the symbol.
When sawing bevel angles, the adjustable
fences must be pulled outwards or re-
moved completely.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended as a stationary machine for mak-
ing straight lengthways and crossways cuts. It is possible to
cut mitre angles of –47° to +52° and bevel angles of 0° to
45°.
Bosch Power Tools
The power tool is designed with sufficient capacity for saw-
ing hardwood, softwood, chipboard and fibreboard, as well
as aluminium and plastic.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Protective guard
(2) Lever for releasing the tool arm
(3) Handle
On/off switch
(4)
(5) Retracting blade guard
(6) Fence
(7) Saw table
(8) Holes for screw clamp
(9) Insert plate
(10) Locking knob for all mitre angles
(11) Mitre presetting lever
(12) Angle indicator for mitre angles
(13) Scale for mitre angles
(14) Mounting holes
(15) Recessed handles
(16) Drill holes for extension bars
(17) Adjustable fence
(18) Screw clamp
(19) Dust bag
(20) Chip deflector
(21) Wing bolt for fixing the adjustable fence
(22) Hex key (6 mm)/cross-headed screwdriver
(23) Stop screw for 45° bevel angle
(24) Tilt protector
(25) Chip ejector
(26) Clamping handle for all bevel angles
(27) Transport safety lock
(28) Transport handle
(29) Spindle lock
(30) Depth stop adjusting screw
Angle indicator for bevel angles
(31)
(32) Scale for bevel angles
(33) Stop screw for 0° bevel angle
(34) Holes for tilt protector
(35) "Tilt protector" fastening set
(36) Extension bar
(37) Fastening screw for extension bar
(38) Cross-head screw (retracting blade guard attach-
ment)
(39) Hex socket screw for mounting the saw blade
(40) Clamping flange
English | 23
1 609 92A 4YL | (14.05.2019)