Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for sawing wood, plastic, metal
and building materials on a firm surface. It is suitable for
straight and curved cuts. When using designated suitable bi-
metal saw blades, flush cutting is also possible. The saw
blade recommendations are to be observed.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
A)
(1) Saw blade
(2) Adjustable base plate
(3) Saw blade receptacle
(4) Locking sleeve for saw blade
(5) Utility hook
(6) Lock-off button for on/off switch
(7) On/off switch
(8) Base plate release button
(9) Worklight
(10) Handle (insulated gripping surface)
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Pendulum action
Constant electronic control
Stroke rate control
Rated power input
No-load stroke rate n
0
Tool holder
Stroke
Max. cutting depth
– In wood
– In steel (unalloyed)
– Pipe diameter
Weight according to
EPTA-Procedure 01:2014
1 609 92A 4TJ | (06.05.2019)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN 62841-2-11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 95 dB(A); sound power level
106 dB(A). Uncertainty K = 5 dB.
Wear hearing protection
Vibration total values a
determined according to EN 62841-2-11:
Cutting boards with saw blade S 3456 XF:
a
Cutting wooden beams with saw blade S 3456 XF:
a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
GSA 1300 PCE
and organising workflows correctly.
3 601 F4E 2..
●
Assembly
●
u
●
W
1300
Inserting/changing the saw blade
−1
min
0−2900
SDS
u
mm
28
u
mm
220
mm
20
mm
175
Selecting the saw blade
kg
4.1
You will find an overview of recommended saw blades at the
end of these operating instructions. Only use saw blades
Reciprocating saw
Protection class
(triax vector sum) and uncertainty K
h
2
2
= 17.5 m/s
, K = 1.5 m/s
,
h,B
2
2
= 23.5 m/s
, K = 1.5 m/s
.
h,WB
Pull the plug out of the socket before carrying out any
work on the power tool.
When fitting or changing the saw blade, wear protect-
ive gloves. Blades are sharp and can become hot when
used for prolonged periods of time.
While replacing the saw blade, ensure that the saw
blade receptacle is free of material residue, e.g. wood
or metal chips.
GSA 1300 PCE
/ Ⅱ
Bosch Power Tools
Werbung
Inhaltsverzeichnis
