Replacing The Motor Cord - KaVo Kerr elements e-motion Bedienungsanleitung

LED lamp inserted in wrong position/with wrong polarity.
Damage to or bending of the contacts.
▶ Make sure that position and polarity are correct.
Case 1: KaVo Mini LED lamp is on.
Case 2: The KaVo Mini LED lamp is faint
- Increase the cold light intensity in the Settings menu on the unit or the LUX
brightness in the device settings until the desired light intensity is reached.
Case 3: KaVo Mini LED lamp is red or off.
- Insert KaVo Mini LED lamp after rotating it 180° about its axis.
▶ Put the sleeve on while twisting slightly.

9.2 Replacing the motor cord

▶ If the motor cord is defective, disconnect the motor cord from the motor
and unscrew it and pull it off the rear of the elements e-motion device.
▶ Connect a new motor cord to the device and the motor.
See also:
2 5.1.3 Connect the motor cord, Page 27
2 5.1.2 Connecting the motor, Page 26
▶ Dispose of the defective motor cord in appropriate manner.
Instructions for use elements e-motion Dental Motor
9 Servicing | 9.2 Replacing the motor cord
NOTICE
49 / 58