Changing The File Position In The Sequence - KaVo Kerr elements e-motion Bedienungsanleitung

Instructions for use elements e-motion Dental Motor
6 Operation | 6.4 Operating the elements e-motion
▶ Tap the third column "File geometry" and shift the column vertically in order
to select the file geometry.
ð
Once the file system and file geometry have been selected, the columns
"Torque", "Speed" and "Colour bar" are assigned automatically except for
the user-defined files.
ð
The data concerning the file systems and file geometries are stored in a file
database, except for the user-defined files.
Speed and torque of the files from the file database can be changed. The data
recommended by the manufacturer of the file are indicated by a factory sym-
bol.

Changing the file position in the sequence

Requirement
File shifting is activated in the device settings (ON).
▶ Activate the "File Editor Sorting" setting of the device, if applicable.
See also:
2 5.2 Changing the device settings, Page 28
▶ Tap the first column "File position" and shift the column vertically in order to
shift the position of the selected file in the sequence (presently: position 1).
▶ Tap the "Back" control element to terminate the processing of file se-
quences.
ð
The set data are saved.
38 / 58