Parts And Components; Before Use; Assembly - cecotec CONGA HYDRO 3030 ACTIVE Bedienungsanleitung

1. PARTS AND COMPONENTS

Fig. 1
1. Steam control button
2. Steam level indicator
3. Low body
4. Mop head
5. Cord hook
6. On/Off switch
7. Filter
8. Power cord
9. Water tank: 330 ml
10. Water measuring cup
11. Mop pad
12. Sliding carpet
13. Cord hook
14. Metal tube
15. Water inlet

2. BEFORE USE

- Take the product out of the box and remove all packaging materials.
- Check carefully if there is any damage. If any is observed, contact as soon as possible the
Technical Support Service of Cecotec for advice or reparation.

3. ASSEMBLY

- The steam cleaner assembly is quick and easy, in 3 steps.
- It contains the following parts.
Fig. 2
1. Handle
2. Low body
3. Mop head
4. Water tank: 330 ml
5. Mop pad
Assembly steps:
1. Place the mop head in the low body by assembling it in place.
2. Install the metal tube in the low body until it is assembled in the correct place.
CONGA HYDROSTEAM 3030 ACTIVE
ENGLISH
27